Outdoor billboard production is now a very important form of advertising. Outdoor billboard can spread advertising information, so it is favored by advertisers and is also the investment hot spot of advertising investors. The following summarizes the production requirements of some large outdoor billboards.

　　1、户外广告有许多因素需要考虑。颜色的形式和材料的选择是你需要考虑的重要的因素。然后你应该考虑当地的民族特色和户外广告的内容。，它应该清晰、简洁和易于理解，尽量不要做复杂的事情。然后你要考虑颜色，深蓝色梯度和红色梯度更持久，不容易褪色;在市场上，室内外广告牌基本上都是灯箱广告，那么彩色霓虹灯需要注意：地板可以尽量选择白色，灰色，淡黄色，粉红色，蓝色和绿色来避免，所以颜色效果会更好，管使用三色霓虹灯管。那么LED灯箱的设计理念就是：、、美观。非常关键，许多制造商非常重视这一指标。LED发光字符说明：焊接是这样的，这应该是超出你的能力，和过程的性质会更重要，户外广告牌制作时也很注重这一点。其他标志如高街标志(单柱广告牌)在设计上特别具有互动性，应注意设计和橱窗展示的内容。公共汽车广告的一般颜色是红色、黄色和蓝色.尽量避免使用黑白，刺激点的颜色会更好。

　　1. There are many factors to consider in outdoor advertising. The choice of color form and material is the most important factor you need to consider. Then you should consider the local ethnic characteristics and outdoor advertising content. First, it should be clear, concise and easy to understand, and try not to do complicated things. Then you should consider the color, dark blue gradient and red gradient more durable, not easy to fade; in the market, indoor and outdoor billboards are basically light box advertising, so color neon lights need to pay attention to: the floor can choose white, gray, light yellow, pink, blue and green to avoid, so the color effect will be better, tube use three color neon tube. So the design concept of LED light box is: energy saving, environmental protection, beautiful. Energy saving is critical and many manufacturers attach great importance to this indicator. LED luminous character description: welding is like this, it should be beyond your ability, and the nature of the process will be more important, outdoor billboard production also pay attention to this point. Other signs, such as high street signs (single column billboards), are particularly interactive in design, and attention should be paid to the contents of design and window display. The general colors of bus advertisements are red, yellow and blue. Try to avoid using black and white, and the color of exciting points will be better.
             

　　2、制定精度要求的基本支持：

　　2. Basic support for establishing accuracy requirements:

　　三棱柱高达20 mm，要求严格计算地基抗压强度和支撑风力。大型户外广告牌生产广告牌支架(广告牌结构)广告牌的基础应安装在固体金属支架或建筑物的墙面上。钢结构的设计和制造。根据基于金属支架和广告牌的自重压缩要求，为了满足当地风向的要求，还需要安装广告牌发光字符，必须按风力发电装置的抗风能力计算。对于收费站广告，如安装在金属支架上的广告牌，支架应放在背后，并全部关闭，以避免光线在背后传播并影响画面。

　　The height of triangular prism is up to 20 mm, which requires strict calculation of foundation compressive strength and supporting wind force. Large outdoor billboard production billboard bracket (billboard structure) the foundation of billboard should be installed on the solid metal support or the wall of the building. Design and manufacture of steel structure. According to the requirements of self weight compression based on metal support and billboard, in order to meet the requirements of local maximum wind direction, it is also necessary to install billboard luminous characters, which must be calculated according to the maximum wind resistance capacity of wind power generation device. For the advertisement of toll station, such as the billboard installed on the metal bracket, the bracket should be placed at the back and all the supports should be closed to prevent the light from spreading behind and affecting the picture.

　　3、广告板更换图片要求：

　　3. Requirements for picture replacement of billboard:

　　先关掉电源。然后从棱镜的侧面移动底部，棱镜的顶部会自动打开。图像通常由后胶制成，可纵向切割，宽度为140毫米，辅以数字，贴上三棱镜的命令(在拆解和移动三棱镜的过程中不能受强影响，防止三棱镜变形，三棱镜的变形会造成故障)。

　　Turn off the power first. Then move the bottom from the side of the prism, and the top of the prism will open automatically. The image is usually made of back glue, which can be cut longitudinally, with a width of 140 mm, supplemented by numbers, and pasted with the command of prism (during the process of disassembling and moving the prism, it can not be strongly affected to prevent the permanent deformation of the prism, and the deformation of the prism will cause failure).

　　4、基于支持强度的要求：

　　4. Requirements based on support strength:

　　连接三个广告牌要求每个点的弹性变形不超过2mm。特别提醒：基座支架的设计和制造在横梁上支撑三个承重结构的广告牌。我们应该找到具有设计和生产水平的技术人员的资格。广告牌安装步骤：根据尺寸要求，先将外包装盒上下包装好的盒子(内角要求为90度)固定在支架上，然后将盒子外盒子左右上下固定，安装三棱镜图片。

　　To connect the three billboards, the elastic deformation of each point should not exceed 2mm. Special reminder: the design and manufacture of the base bracket support three load-bearing structure billboards on the beam. We should find the qualification of professional technicians with design and production level. Installation steps of billboard: according to the size requirements, first fix the top and bottom packed boxes of the outer packing box (the inner angle is required to be 90 degrees) on the bracket, then fix the outer box of the box from left to right up and down, and finally install the prism pictures.