Perfect ink-jet advertising, excellent design and creativity are the inevitable premise of the production materials and technology of ink-jet advertising, which should also be carefully considered. In the post production process of inkjet advertising, there are many aspects worthy of attention. Any mistake in the production of inkjet advertising will lead to the success or failure of inkjet advertising.
今天喷绘公司，为大家总结喷绘广告制作中的注意事项。
Today, Xiao Xin of inkjet printing company summarizes the precautions in the production of inkjet advertising for you.
印刷广告输出:对于输出的图像，精度尤为重要，新汇通对于所有广告制作的精度，都是300DPI，以保证画面的逼真还原。颜色输出要求为CMYK，颜色还原度高。
Print advertising output: for the output image, the accuracy is particularly important. For all advertising production accuracy of xinhuitong, it is 300dpi to ensure the lifelike restoration of the image. The color output requirement is CMYK with high color reduction.
喷墨广告护根:为了保持喷墨广告的效果，将广告用胶片覆盖处理。覆膜时先调整滚筒的捻度，手感完全无阻力可达，微紧。将膜展开并送入，以确保没有横向偏移和膜不被挤压。然后，拉起薄膜，在薄膜的末端，滚筒将会稳定，拉起薄膜，确保末端是平的。
Inkjet advertising rootguard: in order to maintain the effect of inkjet advertising, the advertising is covered with film. When laminating, adjust the twist of the drum first. The handle is completely free of resistance and slightly tight. Unfold and feed the film to ensure there is no lateral offset and the film is not squeezed. Then, pull up the film. At the end of the film, the roller will be stable. Pull up the film and make sure the end is flat.
喷枪广告剪接:对于屏幕大小和纸张差异大的需要剪接，要裁切整齐。我们在剪膜时，也用剪刀沿着线剪，因为这样会方便在覆膜膜上的工作，而且更能保证质量和成功率。
Spray gun advertising splicing: for the screen size and paper difference big need splicing, to cut neatly. When we cut the film, we also use scissors to cut along the line, because this will facilitate the work on the film, and more ensure the quality and success rate.
喷枪广告拼接:广告画面的拼接位置要清晰，画面的上下位置要确定。在输出过程中，由于屏幕要输出的图片是相同的，所以一定要保持其颜色的一致性和相应的大小(如一定的宽度)，要记录下输出的设置，以确保正确。
Spray gun advertising splicing: the splicing position of the advertising picture shall be clear, and the upper and lower positions of the picture shall be determined. In the output process, since the pictures to be output on the screen are the same, it is necessary to keep the color consistency and the corresponding size (such as a certain width), and record the output settings to ensure that they are correct.
喷枪广告拼装板:为了让画面的四面更好的与展示板的边缘相匹配，我们先将画面的两边对齐，然后将展示板的边缘以两面为基准进行对齐。，用裁纸刀沿着展板的长条将多余的部分剪下，完成整幅画。
Spray gun advertising assembly board: in order to better match the four sides of the picture with the edge of the display board, we first align the two sides of the picture, and then align the edge of the display board with the two sides as the benchmark. Finally, use a paper cutter to cut the extra part along the long strip of the display board to complete the whole picture.
